Once the pan is dropped I will perform activation again to listen with a stethoscope at each solenoid to listen for activation. Not sure if that one is normally able to be heard during activation or not, but I figured it's the best educated guess I have at this point w/o dropping the pan. Obviously the Main pressure solenoid was loudest (line pressure boost is easy to hear), and others were slightly audible, however one of the solenoids couldn't be heard at all. Best I was able to do is communicate through another module to command the trans solenoids on/off and listen for activation. I have an internal trans harness on order, also will be replacing all EDS solenoids along with the pressure regulator valve kit, mainly guessing on this because INPA BMW software won't communicate with my TCM to read off solenoid current consumption values. So far, I have checked harness and solenoid resistance from TCM to trans, same values measured as specified as above posted values. e46 inpa transmission codes 33 34 49 53 65 bmw forum, bmw e46 transmission fault. I don't own a RR, however I do have a 2002 X5 4.4 5hp24 with the same EDS, total current fault. Install BMW INPA on WinXP Win7 Win8 Win10 Free Download BMW E-sys V3.22.5 v3.2.61 v3.2.71 Free ECM Titanium 1.61 with 26000 drivers Original wiTech Micropod II vs. Release the button when BMW CC-ID codes appear on the bottom display. Build in 2 lines K and D-Can magisterial BMW INPA Ediabas 5.0.2 download, inpa 5.06 download, inpa 6.4.7 download hereand install it on Windows XP/ Vista or Windows 7/ 8/ 10 (32bit or 64bit), to get. RRphil thank you for your vast wisdom, I have learned a lifetime worth knowledge from reading your posts throughout the years, and sorry for intruding on this forum with only a single post but this has been driving me nuts. Interface USB OBD2 for BMW INPA/Ediabas K+DCAN allows full diagnostic of BMW from 1998 to 2008 (all functions as in OMNITEC interface). Good evening gents, sorry for intruding on this forum.

Inpa bmw oshibka